Kinetis Software Development Kit中的主题 Re: RTC is inaccurate

RTC is inaccurate

joebirch — Wed, 23 Mar 2016 21:14:57 GMT

The RTC is about .02% off (11 secs after 15hrs)

I am using the KSDK2.0 rtc_func demo ("C:\Freescale\KSDK_2.0\boards\frdmk22f\demo_apps\rtc_func").

I have tried it on 2 different FRDM-K22F eval boards

Board 1: 11 secs fast after 15.5 hrs

Board 2: 7 secs after 15hrs, 22 secs after 40hrs

The FRDM-K22F BOM shows the osc is 20PPM

Am I doing something wrong?

I know the RTC can be adjusted but it is unacceptable to have to customize this for each board.

Please help

Joe

Re: RTC is inaccurate

ivadorazinova — Wed, 06 Apr 2016 18:50:30 GMT

Hi joe birch,

please use external clk for RTC because internal oscillator is not very accurate.

You can trim accuracy by using external capacitors.

I hope this helps you.

Have a nice day.

Iva

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: RTC is inaccurate

joebirch — Fri, 08 Apr 2016 13:21:17 GMT

Iva

I am using the FRDM-K22 board and the the KSDK2.0 rtc_func demo ("C:\Freescale\KSDK_2.0\boards\frdmk22f\demo_apps\rtc_func").

This uses the eternal 32.768k osc.

But maybe the osc is not 20PPM as advertised.

I realize this is not a KSDK topic so I will mark this as corrected.

Thanks

Joe