KL03 RTOS Startup code

ericeckenrode — Wed, 23 Mar 2016 18:26:26 GMT

Hi,

I have a question about the below code in my KL03 project.

I'm not using an RTOS. In this case is it ok to remove the code?

** Don't write any code pass this
line, or it will be deleted during code generation. **

/*** RTOS startup code. Macro
PEX_RTOS_START is defined by the RTOS component. DON'T MODIFY THIS CODE!!! ***/

#ifdef PEX_RTOS_START

PEX_RTOS_START(); /* Startup of the selected RTOS. Macro is defined by the
RTOS component. */

#endif

/*** End of RTOS startup code. ***/

/*** Processor Expert end of main routine.
DON'T MODIFY THIS CODE!!! ***/

for(;;){}

/*** Processor Expert end of main routine.
DON'T WRITE CODE BELOW!!! ***/

} /*** End of main routine. DO NOT MODIFY
THIS TEXT!!! ***/

/* END main */

/*!

** @}

Thanks,

Eric

Re: KL03 RTOS Startup code

BlackNight — Wed, 23 Mar 2016 18:30:02 GMT

If you don't have an RTOS (like FreeRTOS or MQX) added to the project as Processor Expert component, then you can remove that

PEX_RTOS_START();

And if you have anyway an RTOS, simply start it yourself like with vTaskStartScheduler() in FreeRTOS.

Erich