Kinetis Software Development Kit中的主题 Re: i accidentally reset the k82f to bootloader mode. is there a way to escape bootloader mode and back to normal?

i accidentally reset the k82f to bootloader mode. is there a way to escape bootloader mode and back to normal?

wesee — Mon, 23 May 2016 17:44:59 GMT

i press and hold reset button and connect the power to go into bootloader mode. how can i get out of the bootloader mode?

Re: i accidentally reset the k82f to bootloader mode. is there a way to escape bootloader mode and back to normal?

jeremyzhou — Tue, 24 May 2016 02:43:37 GMT

Hi Vincent,

I've attached the CMSIS-DAP Interface Firmware for the FRDM-K82F board.

How to load the CMSIS-DAP Interface Firmware:

Press and hold the Reset button, then plug in a USB cable to enter the bootloader mode;
Copy & paster the CMSIS-DAP Interface Firmware to the BOOTLOADER drive;

Have a great day,
Ping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: i accidentally reset the k82f to bootloader mode. is there a way to escape bootloader mode and back to normal?

wesee — Tue, 24 May 2016 04:23:37 GMT

hi jeremy,

do you have the jlink firmware? i downloaded this one (04_OpenSDA_FRDM-K82F.bin) but it complaints it is too large to load.

regards.

Re: i accidentally reset the k82f to bootloader mode. is there a way to escape bootloader mode and back to normal?

jeremyzhou — Tue, 24 May 2016 06:20:41 GMT

Hi Vincent,

Please check the attachments.

CMSIS-DAP Interface Firmware
Segger Jlink Firmware

Have a great day,
Ping