Kinetis Software Development KitのトピックRe: Pin configurator tool

Pin configurator tool

martinfiset — Thu, 21 Apr 2016 01:50:52 GMT

Hello, A few weeks ago I had found an online tool that helped configured Kinetis MCU prior to software development. Unfortunately, I am unable to find it again. The tool allowed to configure pins and select the different peripherals. I am starting a design with a K22 Kinetis MCU. I am using KDS v3. And KDSK v2 for the K22 And I am searching for a tool that will help pins configuration. (since I cannot use processor expert with the KDSK v2). Thanks

Re: Pin configurator tool

ivadorazinova — Thu, 21 Apr 2016 11:55:51 GMT

Hello Martin,

Maybe you had in your mind pin mux tool with i.MX - Interactive i.MX Pin Mux Tool

This tool is unfortunately not available for Kinetis right now.

But pin muxing configuration tool will be available soon - you can forward to new tools coming in 2016:

Kinetis SDK 2.0 Transition Guide Page 9 of 13 : New features will be added over time to the Kinetis Expert Tool to allow for pin muxing selection and generation, clock configuration, and low power estimation.

I hope this helps you.

Have a great day!

Iva

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Pin configurator tool

BlackNight — Sat, 13 Aug 2016 04:53:43 GMT

Hi Martin,

the Pins tool (i.MX and Kinetis) is available here:
New Kinetis Expert Pins Tool V1.0 Available!

https://community.nxp.com/videos/5971

I hope this helps,

Erich