topic Re: missing mandatory configuartion in Kinetis Software Development Kit

missing mandatory configuartion

prabhakaranvelu — Wed, 09 Mar 2016 05:32:38 GMT

I use TWR-K65MF180M ,When I try to debug hello world ,I get error/ saying Missing mandatory configuration.Fill-in the 'Config options.'field in the debugger tab.What shall be the config option

Re: missing mandatory configuartion

ivadorazinova — Thu, 10 Mar 2016 12:38:41 GMT

Hi Prabhakaran Veluchamy,

Please, what IDE do you use? Can you take a picture/print screen of the issue/your configurations and attach here?

Thank you.

Best Regards,

Iva

Re: missing mandatory configuartion

prabhakaranvelu — Fri, 11 Mar 2016 07:25:56 GMT

Hi Iva,

I 've used KDS IDE .

Issue is resolved if add -d kinetis.cfg in other options (Debug Configurations >Debugger > Other Options).

-Prabha

Re: missing mandatory configuartion

ivadorazinova — Fri, 11 Mar 2016 09:31:50 GMT

Hi Prabhakaran,

ok, thank you.

In case of any issue, please let us know.

Best Regards,

Iva

Re: missing mandatory configuartion

prabhakaranvelu — Fri, 18 Mar 2016 02:00:45 GMT

Hi Iva,

I use TWR-K65F180M with Kinetis KDS IDE V3.0.

It works fine with OPEN SDA USB driver so that results are displayed in

UART IO TERMINAL.

I tried to use Semihosting feature (is it working for V3.0 KDS?) and if

enable same and compile I find the UART IO terminal is disabled (as

expected so that result shall be disabled in semihosting console in IDE)

but error window appear as enclosed and debug execution is stopped.

Regards,

Prabhakaran Veluchamy

Devices Engineering

Penang Design Center

Motorola Solutions (M) Sdn Bhd.(Innoplex),No. 2A, Medan Bayan Lepas,Mukim

12, S.W.D.11900 Bayan Lepas,Penang*

motorolasolutions.com <http://www.motorolasolutions.com/>

Off: +6*04-2527864

E: prabhakaran.veluchamy@motorolasolutions.com

On Fri, Mar 11, 2016 at 5:31 PM, ivadorazinova <

Re: missing mandatory configuartion

ivadorazinova — Tue, 22 Mar 2016 21:24:08 GMT

Hi Prabhakaran,

Please refer to this article Semihosting for Kinetis Design Studio V3.0.0 and GNU ARM Embedded (launchpad) | MCU on Eclipse

I hope this helps you.

Best Regards,

Iva

Re: missing mandatory configuartion

eslamessa — Wed, 25 May 2016 13:13:23 GMT

I use FRDM-KW40Z , and have the same problem however I add "-d kinetis.cfg" in other options (Debug Configurations >Debugger > Other Options) nothing is changed