topic Re: 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem. in Kinetis Software Development Kit

'Launching hello_world_frdm64f debug cmsidap' has encountered a problem.

alwilgus — Wed, 21 Oct 2015 02:17:42 GMT

I have a FRDM-K64F and have installed Kinetis SDK 1.3.0 Mainline - Windows.exe Kinetis Design Studio installer for Microsoft Windows 3.0.0.exe and mbedWinSerial_16466.exe. The demo runs in Tera Term. The 'Lib' and the 'Hello World' programs compile. But when I load for debug I get, 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem. Please let me know how to continue.

Re: 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem.

ivadorazinova — Wed, 21 Oct 2015 12:49:53 GMT

Hi Al,

please, have you tried download the latest mbed interface upgrade file for FRDM-K64F?

Firmware FRDM K64F - Handbook | mbed

Kind Regards,

Iva

Re: 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem.

alwilgus — Fri, 20 Nov 2015 01:38:16 GMT

Yes, but still have the same issues. Anyone else having problems with the Hello World problem not working on a new install before/after the upgrade?

Re: 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem.

ivadorazinova — Tue, 24 Nov 2015 14:16:46 GMT

Hi Al,

if you face this issue

I tried with my FRDM-K64F

load firmware for J-Link https://www.segger.com/admin/uploads/userfiles/file/J-Link/OpenSDA/JLink_OpenSDA_2015-10-13.zip
debug "Hello World" demo in KDS, it works ok

re-load firmware for MBED https://developer.mbed.org/media/uploads/sam_grove/0226_k20dx128_k64f_0x5000.bin
debug "Hello World" demo in KDS, it works also ok

Also I´m attaching you the video.

I hope this helps.

Best Regards,

Iva

Re: 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem.

andrékouwen — Fri, 14 Apr 2017 09:18:13 GMT

Hi Iva,

I am trying to run a simple Hello World program with remote on targer debugging which is I think what Al in original post tries to achieve.

I do have a FRDM KEA 128 instead of a K64 board

Here a few question:

* where do I find the sources of this demo project?

* how do I load the J-Link firmware?

* how do I load the MBED firmware?

* Is this also going to work with my installed Kinetics Design Studio 3.2 or do I have to install Kinetis SDK 1.3?

I try to get an proper IDE with remote debugging running to this to me totally new FRDM board.

Any help is greatly appriciated

Thanks

Re: 'Launching hello_world_frdm64f debug cmsidap' has encountered a problem.

andrékouwen — Fri, 14 Apr 2017 09:28:01 GMT

I mean that I would even consider to buy a different boad like the K64F if this would mean that I can really start writing software instead of trying to figure out a proper and working IDE env