topic Re: Starting a project from the scratch for custom hardware in Kinetis Software Development Kit

Starting a project from the scratch for custom hardware

joseasensio — Tue, 01 Sep 2015 14:22:15 GMT

Hi everyone.

I am trying to write a simple application without using code or demos for specific hardware platforms.

I think my includes are ok but I am getting "undefined reference to GPIO_DRV_Init" error.

If I remove the function call, it compiles properly.

The platform library is already built.

What I am doing wrong?

Please see attached image.

Many thanks.

Jose

Re: Starting a project from the scratch for custom hardware

Jorge_Gonzalez — Thu, 03 Sep 2015 03:16:31 GMT

Hello Jose Asensio:

Apart from building the KSDK platform library, have you linked it to the project?

(Project -> Properties -> C/C++ Build -> Settings -> Cross ARM C++ Linker -> Libraries)

The guide in below link is the process on how to create a new KSDK project in KDS from scratch, so you have all the required steps:

Writing my first KSDK1.2 Application in KDS3.0 - Hello World and Toggle LED with GPIO Interrupt

Regards!,
Jorge Gonzalez

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Starting a project from the scratch for custom hardware

joseasensio — Mon, 07 Sep 2015 08:36:17 GMT

Hi Jorge.

I tried to link the library but it didn't work.

Anyway, I will follow that guide and will see how it goes :smileyhappy:

Thanks!

Re: Starting a project from the scratch for custom hardware

Jorge_Gonzalez — Mon, 07 Sep 2015 21:12:17 GMT

Sure, please follow the guide, it should build with no issues.

If you still have problems just let us know.

Regards!

Jorge Gonzalez