topic rtcs serial to ethernet project build error in Kinetis Software Development Kit

rtcs serial to ethernet project build error

sudhakarp — Fri, 30 Jan 2015 10:38:50 GMT

hi,

i have problem in adding header file in KDS IDE. am tried to build RTCS

serial_to_ethernet example project but i cant build that project its gave

error "rtcs.h No file or directory" so how to add

that header file. what are the steps i want to do to successfully build

that project.

Re: rtcs serial to ethernet project build error

ivadorazinova — Fri, 30 Jan 2015 12:04:05 GMT

Hi sudhakar p,

please, what chip are you using?

I will check it.

I also noticed, you are asking in 2 threads together.

KDS mqx RTCS project

Iva

Re: rtcs serial to ethernet project build error

sudhakarp — Sat, 31 Jan 2015 04:06:27 GMT

am using FRDM-K64F120 controller. suppose i want to include headed file from existing source file means what are the steps i want to do... is project properties i want to include or i want to add anythink..?

Re: rtcs serial to ethernet project build error

DavidS — Sat, 31 Jan 2015 18:13:06 GMT

Hi Sudhakar,

Have you built the RTCS library first?

C:\Freescale\KSDK_1.1.0\tcpip\rtcs\build\kds\rtcs_frdmk64f

Also please review the following to build the RTOS:

C:\Freescale\KSDK_1.1.0\rtos\mqx\doc\Getting Started with Freescale MQX RTOS for Kinetis SDK.pdf

With all this built, then you should be able to build the application.

Regards,

David

Re: rtcs serial to ethernet project build error

sudhakarp — Mon, 02 Feb 2015 04:02:58 GMT

hi David,

thank you,you are correct after build Rtcs library its working fine.