Kinetis Design StudioのトピックRe: PE Micro Multilink and Windows 10 problem

PE Micro Multilink and Windows 10 problem

larrydemuth — Mon, 05 Mar 2018 22:37:56 GMT

I just installed KDS on a new windows 10 machine and am having problems with the PE micro Multilink universal debugger. The drivers are installed. In device manager I see Jungo with USB multilink 2.0 and windriver. On my win 7 machine if I plug in the debugger the lights come on on the PE Micro even without KDS running. On win 10 they do not. Obviously I get an error when I try to debug on win 10. Are there different drivers for win 10? I came across a link for a patch to fix PE Micro driver problems but when I click on it, the link says the download does not exist. http://www.pemicro.com/downloads/download_file.cfm?download_id=460

Re: PE Micro Multilink and Windows 10 problem

larrydemuth — Mon, 05 Mar 2018 23:11:05 GMT

I did find an updated driver:

PEmicro - P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug pr…

Look for PE Hardware interface drivers Version 12 (Win XP/Vista/7/8/10) Its in small type.

and now the lights come on, but when I try to debug I get the following error:

Error in final launch sequence
Failed to execute MI command:
-target-select remote localhost:7222
Error message from debugger back end:
localhost:7222: The system tried to join a drive to a directory on a joined drive.
localhost:7222: The system tried to join a drive to a directory on a joined drive.

Any ideas what it means and how to fix?

Re: PE Micro Multilink and Windows 10 problem

larrydemuth — Mon, 05 Mar 2018 23:29:46 GMT

OK, I have it working. In KDS I had to go into Install new software, and select PE Micro updates and check PE Micro software and click next to install new stuff. I then had to go into the debugger settings and re-select the target micro.

Hopefully this will help someone...

Re: PE Micro Multilink and Windows 10 problem

Alice_Yang — Thu, 08 Mar 2018 02:21:45 GMT

Hello Larry,

Thanks for your sharing.

Alice

Re: PE Micro Multilink and Windows 10 problem

codyhubman — Thu, 09 Aug 2018 20:03:34 GMT

I was losing my mind. You are a life saver Larry.

For others, this worked for me. IF you are using SWD protocol make sure to check the box "SWD protocol" in the Debug Configurations menu

Re: PE Micro Multilink and Windows 10 problem

BlackNight — Thu, 09 Aug 2018 20:25:29 GMT

One reason for that message is that the 'launch' checkbox is not checked in the debug configuration, see

Fix for GDB and “The system tried to join a drive to a directory on a joined drive” | MCU on Eclipse

I hope this helps,

Erich