topic Re: KDS 3.2.0- Interrupt vector table generation in Kinetis Design Studio

KDS 3.2.0- Interrupt vector table generation

danielcheng — Tue, 08 Nov 2016 15:22:09 GMT

I have a question regarding the interrupt vector table generation (vectors.c) using processor expert. The code I inherited from my former college is shown on the left below. I was trying re-generate a new project using KDS 3.2.0, and the generated code (vectors.c) is quite bit different as shown on the right side of the figure below. Are there any disabled settings I am not aware of? Does the KDS version (3.2.0 vs 3.1.0) make any difference? Thank you.

Re: KDS 3.2.0- Interrupt vector table generation

Alice_Yang — Wed, 09 Nov 2016 01:42:42 GMT

Hello Daneil,

There is no wrong about your code , these are different version.

On KDSv3.2 , it will show the interrupt function name after you enable the related interrupt

on component . For example , if you use ADC interrupt , after you enable the interrupt at here :

then click generate code , build , in the Vectors_Config.h file , you can see the ADC interrupt function .

Hope it helps

Alice

Re: KDS 3.2.0- Interrupt vector table generation

MarekTrmac — Thu, 10 Nov 2016 08:36:19 GMT

Hi Daniel,

try this option in CPU component:

Regards

Marek

Re: KDS 3.2.0- Interrupt vector table generation

danielcheng — Tue, 13 Dec 2016 16:14:10 GMT

Thank you. this works out for me.