Kinetis Design StudioのトピックRe: FRDM K66 OpenSDA

FRDM K66 OpenSDA

eli_hughes — Thu, 30 Jun 2016 15:14:48 GMT

I have a FRDM-K66 board where the open SDA interface has failed. I think it is the issue described here:

https://mcuoneclipse.com/2016/06/26/how-to-recover-the-opensda-v2-x-bootloader/

I need to recover the bootloader. When I go here:

OpenSDA Serial and Debug Adapter|NXP

The bootloader and OpenSDA applications are not available for the K66.

Please help!

Re: FRDM K66 OpenSDA

BlackNight — Thu, 30 Jun 2016 15:28:16 GMT

Hi Eli,

I don't have a FRDM-K66, so I cannot tell for sure. But it looks like it is using the same circuit and K20 as the FRDM-K22F. So I would flash the bootloader of the FRDM-K22F to the FRDM-K66.

I hope this helps,

Erich

Re: FRDM K66 OpenSDA

shengrongwu — Thu, 30 Jun 2016 21:30:20 GMT

Hi Eli,

I will second Erich on that. FRDM-K66F has v2.1 bootloader on its OpenSDA circuit, which is the same as FRDM-K22F.

The default OpenSDA applications on FRDM-K66F is Jlink application, which you could get from www.segger.com/opensda.

I am having the web team to add FRDM-K66F to OpenSDA Serial and Debug Adapter|NXP

Regards,

Roy

Re: FRDM K66 OpenSDA

DavidS — Fri, 01 Jul 2016 17:15:43 GMT

I have a FRDM-K66F and used the PEMicro DEBUG firmware that is attached for the debugger interface.

I successfully tested it with KSDK_v2 examples for FRDM-K66F.

Regards,

David

Re: FRDM K66 OpenSDA

ZhangJennie — Wed, 06 Jul 2016 03:24:46 GMT

Hi Eli.

in addition, I would also like to suggest you try Jlink OpenSDA,

SEGGER - The Embedded Experts - OpenSDA / OpenSDA V2

So you can download Jlink Open SDA from here:

SEGGER - The Embedded Experts - Downloads - J-Link / J-Trace

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: FRDM K66 OpenSDA

eli_hughes — Tue, 12 Jul 2016 12:13:49 GMT

Thank you for all the responses. We did reflash the bootloader but it appears that the problem maybe with the hardware. When the K66 is plugged in, Windows says it is not recognized. It looks like there is some USB activity, it is just not behaving correctly.

We may try to swap the chip on the board.