topic Re: Hexiwear Docking Station in Kinetis Design Studio

Hexiwear Docking Station

majidrehman — Thu, 14 Jul 2016 23:23:11 GMT

Hi,

I am facing problem with Hexiwear Docking Station.

When I connect Docking Station with my PC, then always mass drive label shows "MAINTENANCE".

can anyone help me how to fix this problem.

Thanks,

Majid

BlackNight — Fri, 15 Jul 2016 07:37:46 GMT

Hi Majid,

this means that you are in 'bootloader' mode (see https://mcuoneclipse.com/2016/07/12/hexiwear-teardown-of-the-hackable-do-anything-device/ ). This happens if you power on the docking station with the reset button pressed. Or for some reasons you have erased the DAPlink debug application?

- try the docking station without the Hexiwear

- make sure that the reset button(s) on the board are not pressed

- check the voltage level of the reset line, maybe you have a shortcut on your board

In any case, you can use the onboard SWD cable to debug the Hexiwear.

I hope this helps,

Erich

majidrehman — Fri, 15 Jul 2016 10:22:16 GMT

actually when I connect docking station without Hexiwear then nothing happen meaning mass drive DAPLINK does not appears,

and when I connect Hexiwear with docking station and turn ON, then mass drive MAINTENANCE appears with following files,

DETAILS.txt and HELP_FAQ.htm

any suggestion ?

Thanks

Majid