topic How can I set pin drive using processor expert in KDS in Kinetis Design Studio https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335398#M730 <HTML><HEAD></HEAD><BODY><P>I am using K10DX256VLK7 processor.&nbsp; How can I set pin drive, or enable pull up/down through processor expert within KDS.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Dave</P></BODY></HTML> Wed, 12 Nov 2014 20:51:16 GMT davidskok 2014-11-12T20:51:16Z How can I set pin drive using processor expert in KDS https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335398#M730 <HTML><HEAD></HEAD><BODY><P>I am using K10DX256VLK7 processor.&nbsp; How can I set pin drive, or enable pull up/down through processor expert within KDS.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Dave</P></BODY></HTML> Wed, 12 Nov 2014 20:51:16 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335398#M730 davidskok 2014-11-12T20:51:16Z Re: How can I set pin drive using processor expert in KDS https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335399#M731 <HTML><HEAD></HEAD><BODY><P>You can do this with the Init components, see</P><P><A href="http://mcuoneclipse.com/2012/11/12/tutorial-bits-and-pins-with-kinetis/" title="http://mcuoneclipse.com/2012/11/12/tutorial-bits-and-pins-with-kinetis/">http://mcuoneclipse.com/2012/11/12/tutorial-bits-and-pins-with-kinetis/</A></P><P>(section Init_GPIO)</P><P></P><P>I hope this helps,</P><P>Erich</P></BODY></HTML> Wed, 12 Nov 2014 20:56:55 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335399#M731 BlackNight 2014-11-12T20:56:55Z Re: How can I set pin drive using processor expert in KDS https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335400#M732 <HTML><HEAD></HEAD><BODY><P>Thank you Erich, exactly what I was looking for!</P><P></P><P>Your MCU On Eclipse blog is full of valuable information!!</P></BODY></HTML> Thu, 13 Nov 2014 13:14:47 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/How-can-I-set-pin-drive-using-processor-expert-in-KDS/m-p/335400#M732 davidskok 2014-11-13T13:14:47Z