Kinetis Design StudioのトピックRe: How to install and make USBDM programmer work in KDS 3.2

How to install and make USBDM programmer work in KDS 3.2

MAPC — Wed, 13 Jul 2016 20:30:01 GMT

Hello, pgo

I just bought a programmer running your USBDM from Luciano in Brazil.

Could you please explain me how to install USBDM plugin to make KDS 3.2 recognize USBDM programmer? I have carefully followed your video in USBDM with Kinetis Design Studio and Kinetis SDK - YouTube and just changed the paths to KDS 3.2 and KSDK 2.1 paths.

I'm struggling to make it work, but it has been a difficult task.

I also tried in KDS 3.0.0 and pointing to KSDK 1.3. I have all of them installed on my computer. But it fails with all the alternatives.

I need to visit a customer on Wednesday next week and I'd like to have everything working on my computer for a training.

Could you lend me a helping hand please?

The version I have installed here is the latest one: 4.12.1.110

Thanks and best regards,

Marco Coelho

Applications Engineer

Siletec Eletronica

Re: How to install and make USBDM programmer work in KDS 3.2

Alice_Yang — Thu, 14 Jul 2016 07:22:23 GMT

Hello ,

Could you tell me what about the error on your side , or in which step it crash on your side .

Maybe there is something wrong on the configuration of KDS, there is a detail configuration

about use USBDM on KDS :

USBDM: Eclipse - USBDM Features

And also which board do you used ? There is a demo about FRDM-kl25 board :

USBDM: Setting Up the FRDM-KL25Z

Hope it helps

Alice

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Thu, 14 Jul 2016 14:07:18 GMT

Dear Alice Yang,

Thanks for fast response.

I think my configurations are correct. See bellow my USBDM and Debug Configurations in KDS 3.2:

One point that called my attention is that "Build Tool" selection field in "Debug Configurations" is in blank.

As I try to program the MCU and go to Debugger, I get this error:

Marco Coelho

Re: How to install and make USBDM programmer work in KDS 3.2

Alice_Yang — Fri, 15 Jul 2016 03:06:33 GMT

Hello Marco,

I test one project(without KSDK) on my side , it can work well .

First , please be sure you have in stall the USBDM Ddiver (not the USBDM software )?

USBDM - Browse /Version 4.12.1/Drivers at SourceForge.net

Second , when you create project, have you select the Build tools :

The attachment is the project i test on FRDM-KL25, you can test it on you side .

The debugger configuration on my side is like this :

If your board is not FRDM-KL25, please also first create one simple project to have a try .

Hope it helps

Alice

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Fri, 15 Jul 2016 12:58:50 GMT

Hi, Dear Alice

But I won't create another project. I want to use USBDM programmer in a project that was previously created with another tool and select it in Debug Configurations, but I can't.

Marco Coelho

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Fri, 15 Jul 2016 13:05:15 GMT

The driver version I installed on my computer is 4.12.1 and software versionn is 4.12.1.30, as I said previously.

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Fri, 15 Jul 2016 18:56:24 GMT

Dear Alice,

Please have attached my code. This code was originally created in KDS (KDS Project Creator) for FRDM-K64F (P&E Open-SDA) with KDSK v2. I didn't create a new project through USBDM menu.

I'm trying to program my FRDM-K64F through USBDM programmer, but it fails. As I showed in my previous message, the selection field relative to "Build Tool" doesn't show anything. Is is in blank. Maybe you can reproduce the same error on your side.

Thanks!

Marco Coelho

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Fri, 15 Jul 2016 20:26:50 GMT

As I hit Refresh Button in Debug Configuration, it shows the following error:

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Fri, 15 Jul 2016 20:32:12 GMT

Dear Alice,

I just tried to load your MKL25Z code on my FRDM-KL25Z, but keeps on failing. Now everything is blank in Debug Configurations:

Re: How to install and make USBDM programmer work in KDS 3.2

Alice_Yang — Mon, 18 Jul 2016 08:17:55 GMT

Hello Marco,

I test your attached project , it also can work well :

So it not the reason of project.

Which system do you used ? Please uninstall your USBDM software , then install the latest version :

USBDM - Browse /Version 4.12.1/Software at SourceForge.net

Pay attention that, when you install it , select the right path of KDS, you'd batter take a screenshot about it.

If still can not used , please install the KDS again , and install the latest version of KDS V3.2 .

Hope it helps

Alice

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Mon, 18 Jul 2016 12:12:00 GMT

I have already installed and reinstalled latest USBDM drivers and software several times (including rebooting Windows (10) after removing and reinstalling the package).

I don't understand. USBDM is the only tool not working. Multilink Universal, for example, always works. It is hard for me to uninstall KDS and KSDK and reinstall all this again. It takes a lot of time and I need the IDE to provide support to my customers. I don't have available time for that.

I'm sincerely considering not using USBDM and not recommending this tool to our customers anymore.

Thanks,

Marco Coelho

Applications Engineer

Siletec Eletronica

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Mon, 18 Jul 2016 16:36:22 GMT

Dear Alice,

I spent all the morning, uninstalling and reinstalling KDS, KSDK and USBDM drivers and software package.

The same errors reported above remain.

If I try to create a new project through USBDM menu, I get this error:

Java is up-to-date in my computer.

My USBDM configuration (with KSDK MK64FN1M0xxx12 v2) looks like this:

I give it up!

Marco Coelho

Applications Engineer

Siletec Eletronica

Re: How to install and make USBDM programmer work in KDS 3.2

Alice_Yang — Tue, 19 Jul 2016 10:19:40 GMT

Oh Marco,

Maybe the reason is Win10 , i use WIN 7 64 bit .

Ok, if it so tedious , i also agree you use the other debugger .

Alice

Re: How to install and make USBDM programmer work in KDS 3.2

pgo — Wed, 20 Jul 2016 07:39:09 GMT

Hi Marco,

I have only just come across this thread.

The above error is caused by a invalid or missing setup file that then upsets the dialogues you are using.

The error only occurs is a certain sequence is followed but once it occurs it is persistent.

Please try the version just uploaded which has a fix for this : USBDM_4_12_1_120_Win.msi

You should probably also delete the %APPDATA%/usbdm folder which contains the invalid setup.

Alternatively I believe the error may also be fixed by opening the USBDM->Configure menu and visiting all the config pages (expand the menu at the left). Ignore any error messages. Once a valid config is created the error no longer occurs.

bye

Re: How to install and make USBDM programmer work in KDS 3.2

MAPC — Wed, 20 Jul 2016 17:02:26 GMT

Dear pgo,

Yes! I followed your alternative tip: opening the USBDM->Configure menu and visiting all the config pages (expand the menu at the left). Ignore any error messages.

Now everything is working. I could never know this would be the cause of this issue.

Thank you very much!

Marco Coelho

Applications Engineer

Siletec Eletronica

Re: How to install and make USBDM programmer work in KDS 3.2

pgo — Thu, 21 Jul 2016 00:50:21 GMT

Hi Marco,

Your welcome.

I'm sorry for the original bug that caused you considerable frustration.

bye

Re: How to install and make USBDM programmer work in KDS 3.2

micheljssimon — Thu, 31 Oct 2019 19:08:42 GMT

Hi Pgo,

Can you please help me to do the same thing but on S32DS instead? I coudn´t install the USBDM plugin and I´m using S32DS ARM 2018 R1. The target MCU is an SKEAZN64.