Kinetis Design StudioのトピックRe: Debugging with built in debug interface of Freedom KL25Z

Debugging with built in debug interface of Freedom KL25Z

avinashgupta — Sun, 31 Jul 2016 02:05:29 GMT

Hello,

I am just starting with KL25Z series. I have a Freedom KL25Z board which has OpenSDA debug adapter (http://www.pemicro.com/opensda/) is it supported by Kinetis Design Studio? Becasuse in document KDS200UG page 1 it says Kinetis Design Studio Supports

Support for SEGGER J-Link/J-Trace, P&E USB Multilink Universal/USB MultilinkUniversal FX andC MSIS-DAPdebugadapters

Re: Debugging with built in debug interface of Freedom KL25Z

ZhangJennie — Mon, 01 Aug 2016 06:03:09 GMT

hi,

yes, KDS can support OpenSDA. see

Kinetis Design Studio Integrated Development Envir|NXP

Can this help you?

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Debugging with built in debug interface of Freedom KL25Z

avinashgupta — Mon, 01 Aug 2016 07:00:09 GMT

Thanks.

Yes, just after posting this I figured out. I also successfully configured the debugger and also used it. All worked without any problem.