topic Re: Debugging configuration problem in KDS in Kinetis Design Studio https://community.nxp.com/t5/Kinetis-Design-Studio/Debugging-configuration-problem-in-KDS/m-p/509171#M6591 <HTML><HEAD></HEAD><BODY><P>Hi Divya,</P><P>have you plugged the cable into the 'openSDAD' port? And have you loaded the P&amp;E debug firmware on the board (K20, OpenSDA) already? See <A href="http://mcuoneclipse.com/2014/11/01/illustrated-step-by-step-instructions-updating-the-freescale-freedom-board-firmware/" title="http://mcuoneclipse.com/2014/11/01/illustrated-step-by-step-instructions-updating-the-freescale-freedom-board-firmware/">Illustrated Step-by-Step Instructions: Updating the Freescale Freedom Board Firmware | MCU on Eclipse</A> .</P><P></P><P>I hope this helps,</P><P>Erich</P></BODY></HTML> Mon, 15 Feb 2016 07:03:23 GMT BlackNight 2016-02-15T07:03:23Z Debugging configuration problem in KDS https://community.nxp.com/t5/Kinetis-Design-Studio/Debugging-configuration-problem-in-KDS/m-p/509170#M6590 <HTML><HEAD></HEAD><BODY><P>I am unable to detect my port in port tab of open SDA debuger configurations.Even though my FRDM-KL25Z board is plugged to USB port in my system.Do anyone faced the same issue ,if so please help me to sort it out</P></BODY></HTML> Sat, 13 Feb 2016 16:03:19 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Debugging-configuration-problem-in-KDS/m-p/509170#M6590 divyadavis 2016-02-13T16:03:19Z Re: Debugging configuration problem in KDS https://community.nxp.com/t5/Kinetis-Design-Studio/Debugging-configuration-problem-in-KDS/m-p/509171#M6591 <HTML><HEAD></HEAD><BODY><P>Hi Divya,</P><P>have you plugged the cable into the 'openSDAD' port? And have you loaded the P&amp;E debug firmware on the board (K20, OpenSDA) already? See <A href="http://mcuoneclipse.com/2014/11/01/illustrated-step-by-step-instructions-updating-the-freescale-freedom-board-firmware/" title="http://mcuoneclipse.com/2014/11/01/illustrated-step-by-step-instructions-updating-the-freescale-freedom-board-firmware/">Illustrated Step-by-Step Instructions: Updating the Freescale Freedom Board Firmware | MCU on Eclipse</A> .</P><P></P><P>I hope this helps,</P><P>Erich</P></BODY></HTML> Mon, 15 Feb 2016 07:03:23 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Debugging-configuration-problem-in-KDS/m-p/509171#M6591 BlackNight 2016-02-15T07:03:23Z