Kinetis Design StudioのトピックRe: Launching screen hangs on 94%

Launching screen hangs on 94%

neilporven — Thu, 14 Apr 2016 13:36:17 GMT

I am getting hanged up on the following screen:

It stays at 94% and never continues past this. I also find it annoying that the Cancel button doesn't respond

once pressed.

By the way, the software compiles without errors and I tried re-building it several times and have also done

a clean on it. If I load another software, it seems to load fine, so there isn't a hardware/multilink issue with

the board.

Can someone explain why this is happening?

Thanks,

Neil Porven

BlackNight — Thu, 14 Apr 2016 13:49:54 GMT

Hi Neil,

Erich

neilporven — Thu, 14 Apr 2016 14:31:33 GMT

Thank you Erich,

Quick update, if you want to see the code and experience the issue.

I am using the following:

C:\Freescale\SDK_2.0_K64F\boards\frdmk64f\driver_examples\sdcard\polling\kds

Just load that, compile it, plug in your P&E to your FRDMK64F evaluation board and you should

see what I am seeing.

Neil

neilporven — Thu, 14 Apr 2016 14:46:50 GMT

Hi Erich,

I followed the link you sent me and it described the issue, exactly! I followed your fix and sure enough, the debug execution

completed all the way through.

Excellent, thank you much.

I will update my KDS to 3.2.0 to avoid this in the future.

Neil