CodeWarrior to KDS conversion?

vigneshbalaji — Mon, 23 May 2016 05:35:36 GMT

Hi,

I am migrating from CodeWarrior to KDS.I am finding problem with these files.

cstdint, cstring .

I know that codeWarrior uses EWL and KDS uses Newlib.What are the replacement for those files???

Re: CodeWarrior to KDS conversion?

TICS_Fiona — Wed, 25 May 2016 11:21:05 GMT

Hello VIGNESH

KDS use GNU Tools for ARM Embedded (launchpad, GCC ARM Embedded in Launchpad) toolchain from v3.0.

Its library is under:

C:\Freescale\KDS_v3\Toolchain\arm-none-eabi\lib

Its difference with CodeWarrior is that the user does not need to add the library file in the linker settings in Project Properties. Based on the compiler and architecture options configured in Project Properties, the linker uses the corresponding pre-built libraries.

For cstring operations, you can choose C99 support.

In addition, these two links should be helpful to you:

https://community.freescale.com/docs/DOC-103698

https://mcuoneclipse.com/2014/07/11/switching-arm-gnu-tool-chain-and-libraries-in-kinetis-design-studio/

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Kinetis Design Studio中的主题 CodeWarrior to KDS conversion?

CodeWarrior to KDS conversion?

Re: CodeWarrior to KDS conversion?