Kinetis Design StudioのトピックRe: Flash Driver for KEA-128

Flash Driver for KEA-128

vigneshbalaji — Mon, 22 Feb 2016 04:53:49 GMT

Hi,

I want an example code for Flash Driver of KEA-128.

Re: Flash Driver for KEA-128

Alice_Yang — Mon, 22 Feb 2016 06:31:25 GMT

Hello VIGNESH,

Do you use the KDS IDE ? If yes, you can create one Processor Expert project,

then add the ""FALSH_LDD" component, right click the "Help on component " , in the typical Usage , there is the demo code

about flash .

Hope it helps

Have a great day,
Alice Yang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Flash Driver for KEA-128

vigneshbalaji — Mon, 22 Feb 2016 09:35:40 GMT

Hi Alice,

I am not using KDS.I want an example code or a driver for it instead of Processor Expert Component.

Re: Flash Driver for KEA-128

Alice_Yang — Tue, 23 Feb 2016 03:45:27 GMT

Hi Vignesh,

There is a KEA-128 driver , it includes the flash driver and demo ,

flash driver: KEA_Driver_Lib_V1\KEA_Driver_Lib_V1\Sources\drivers\nvm

demo :KEA_Driver_Lib_V1\KEA128_Demos\KEA128_Demos\Flash_demo

Please see the attachment .

Have a great day,
Alice Yang

Re: Flash Driver for KEA-128

vigneshbalaji — Tue, 17 May 2016 14:54:52 GMT

Hi,

I want to know

1)How to edit the linker file?

2)what is the starting address of Erasable Flash?

3)I want to know the memory organization of KEA-128 in detail?

Re: Flash Driver for KEA-128

Alice_Yang — Wed, 18 May 2016 10:07:05 GMT

Hello,

Does your three question is about the demo i send to you ?

If yes, please take a screenshot and describe it clearly , and you'd better create one

by yourself , then if there go something wrong , we can refer to the problem to reply .

Here i don't know you want use what to edit , what starting.......

And if no, in order help you sooner , you'd better take a new question on other thread .

Alice

Re: Flash Driver for KEA-128

vigneshbalaji — Sun, 22 May 2016 18:13:07 GMT

Hi Alice,

I have splitted the text segment in KEA-128.I want to know whether it is right or not.Please Look at my project which I have attached here.

This is my text division.Please take a look at it and tell me whether I have divided it right or not as per KEA-128.I am confused about the start address of my_text.Is it right???

MEMORY

{

m_interrupts (rx) : ORIGIN = 0x00000000, LENGTH = 0xC0

m_cfmprotrom (rx) : ORIGIN = 0x00000400, LENGTH = 0x10

m_text (rx) : ORIGIN = 0x00000800, LENGTH = 128K - 0x800

my_text (rx) : ORIGIN = 0x0001EC00, LENGTH = 0x1000 /*New ROM segment*/

m_data (rwx) : ORIGIN = 0x1FFFF000, LENGTH = 16K /* SRAM */

}

Re: Flash Driver for KEA-128

TICS_Fiona — Mon, 23 May 2016 07:36:26 GMT

Hello Vignesh

I replied you this question in:

Splitting m_text in Linker File of CW

Best Regards

Fiona Kuang

TIC - Technical Information Center