Problem with KDS and Processor expert

michelmeunier — Fri, 11 Mar 2016 09:31:11 GMT

Hello,

I have an old project wich works fine for me (it uses FRDMKL25, the include MMA8451 and an external I2C component). I would like to start a similar new project, unfortunatly something is going wrong.

In my old project, they were only few components, but now with the new one after creating project, I have a lot of components. Some pictures to explain.

It's my old project with only the things I have added (MMA1,AS1,GI2C2...etc).

Just after creating the new project, I have strange components (osa1,clockman1,pin_mux..etc).

Also when I want to create an I2C connections, I can't select the pins:

My goal is to have a simple project as the old one!! I am not interested by pin_mux,intMan1 ...etc, it was working without that before.

Thanks for your help

Re: Problem with KDS and Processor expert

BlackNight — Fri, 11 Mar 2016 09:46:07 GMT

This is because you are using the SDK.

Select 'none' during project creation:

Erich

Re: Problem with KDS and Processor expert

michelmeunier — Fri, 11 Mar 2016 10:43:16 GMT

As usually Erich, you have the solution, thanks a lot.

Michel

topic Problem with KDS and Processor expert in Kinetis Design Studio

Problem with KDS and Processor expert

Re: Problem with KDS and Processor expert

Re: Problem with KDS and Processor expert