Kinetis Design StudioのトピックRe: Codewarrior Peoject To KDS

Codewarrior Peoject To KDS

salah — Wed, 20 May 2015 16:53:32 GMT

Dear All,

I am using Codewarrior 10.6 for TWR-KW24D512 boards. I would like to try KDS instead codewarrior. How can I transfer code warrior project to KDS and configure the board? Please help

Thanks!

Salah

Re: Codewarrior Peoject To KDS

TICS_Fiona — Tue, 26 May 2015 06:55:04 GMT

To Import the project I did in KDS: File-> Import-> Existing Projects Into Workspace and then I selected the project I created in CodeWarrior. Once the project is imported I did right click on it and I selected "convert CodeWarrior project file."

For details you may refer to the documents below:

http://cache.freescale.com/files/microcontrollers/doc/user_guide/KDSPGQS.pdf

https://community.freescale.com/docs/DOC-102594

Hope it helps!

Fiona Kuang

Technical Information & Commercial Support

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: Codewarrior Peoject To KDS

salah — Tue, 26 May 2015 21:08:03 GMT

Hi Fiona,

I just replied the SR with More information. Please take a look. I am still getting this error:

Description Resource Path Location Type

make: *** No rule to make target `MyWirelessApp Demo End Device - Security Enabled.elf', needed by `main-build'. Stop. MyWirelessApp Demo End Device - Security Enabled C/C++ Problem

I am trying a demo which was generated using Beekit to CW.

Thanks,
Salah