Kinetis Design StudioのトピックRe: TWR-KV58F220M debug problem

TWR-KV58F220M debug problem

1029470549 — Fri, 27 Nov 2015 01:46:32 GMT

Hi,when i am using TWR-KV58F220M, I failed to debug it via KDS and KEIL.

they both have error.

the KEIL has error like :

the KDS has error like:

I tried some solutions, the error from KDS became

Error: couldn't bind to socket: No error

and i still can't debug it.

when i want to use jlink to erase the chip, I failed agin here is the error dispayed

How can I solve this? THX!

Alice_Yang — Mon, 30 Nov 2015 07:53:53 GMT

Hello ningmeng,

- What about your project ? Could you please create one simple project , then try again ?

- And have you drag and drop the file of "JLink_OpenSDA_V2_1_2015-04-23.bin" into board

when it in the bootloader mode ? About the detail information please refer to ：

TWR-KV58F220M-QSP\TWR-KV58F220M_Quick Start Package\OpenSDA Application\Segger OpenSDA

Hope it helps

Alice

1029470549 — Mon, 30 Nov 2015 08:09:19 GMT

HI，I ‘ve drag and drop the file of "JLink_OpenSDA_V2_1_2015-04-23.bin" into board.

Then,i create a blank project of "MKV58F220M" processor.

but when i use Debug_Seager. It still don't work.

Below is the information KDS gived.