topic Error in final launch sequence. Failed to execute MI command: -target-select remote localhost:7224 in Kinetis Design Studio

Error in final launch sequence. Failed to execute MI command: -target-select remote localhost:7224

armaram — Sun, 29 Nov 2015 08:58:26 GMT

We are working with KDS 3.0.0 and KSDK 1.3.0 on the FRDM-KL03Z dev brd and frequently keep encountering this error. We try all things like resetting the board, disconnecting it, restarting KDS sometime that helps but this time nothing seems to be working.

--------------

Error in final launch sequence

Failed to execute MI command:

-target-select remote localhost:7224

Error message from debugger back end:

Remote communication error. Target disconnected.: No error.

--------------

We are stuck with this error and cannot move forward. Any guidance will be of great help?

Thanks,

Arvind

Re: Error in final launch sequence. Failed to execute MI command: -target-select remote localhost:7224

Carlos_Mendoza — Mon, 30 Nov 2015 15:55:45 GMT

Hi Arvind,

Please take a look to the following post created by our colleague Erich Styger, it gives some trouble shooting tips for debugging:

GDB Debugging with Kinetis Design Studio

Let us know if it helps!

Best Regards,

Carlos Mendoza

Technical Support Engineer

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: Error in final launch sequence. Failed to execute MI command: -target-select remote localhost:7224

armaram — Tue, 01 Dec 2015 02:46:17 GMT

Thank you Carlos, it was helpful.

Regards,

Arvind