Kinetis Design StudioのトピックRe: PEx problem with k22f board

PEx problem with k22f board

rémiraynaud — Fri, 24 Apr 2015 12:35:46 GMT

hello

I have a PEx problem, with KDS 2.0 and SDK 1.0.0.

Re: PEx problem with k22f board

Carlos_Mendoza — Fri, 24 Apr 2015 22:15:15 GMT

Hi Rémi,

I would recommend you to use the latest tool version (KSDK v1.1.0). You can use the following video as reference to create your application, it explains how to use Processor Expert to configure the KSDK GPIO Peripheral Driver with the component fsl_gpio in Kinetis Design Studio:

Video Link : 3195

Here is the link where you can download Kinetis SDK 1.1.0 Mainline:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KINETIS-SDK&tab=Design_Tools_Tab

Hope it helps!

Best Regards,

Carlos Mendoza

Technical Support Engineer

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: PEx problem with k22f board

rémiraynaud — Mon, 27 Apr 2015 13:54:32 GMT

Thank's carlos,

But I necessarily have to make my project with SDK 1.0.0.

I uploaded processor expert patch for k22f.

Now, I haven't the last PEx problem yet. But when I add MQX_KSDK and OS_TASK to my project, other errors appear :

Description	Resource	Path	Location	Type
ERROR: Project doesn't contain "OS_Task" component. Please add the OS_Task component to the project.	serial_test_project_k22f_ksdk1.0		mqx_ksdk	Processor Expert Problem
ERROR: Component does not support Kinetis SDK API version.	serial_test_project_k22f_ksdk1.0		choice_test_task	Processor Expert Problem
Generator: ERROR: There are errors in the project, please review components configuration. It is not possible to generate code.	serial_test_project_k22f_ksdk1.0		Code Generator	Processor Expert Problem

There are any other patch to upload for processor expert and the k22f?

Do I have to remove sdk 1.1.0 of KDS?

Best regards,

Rémi

Re: PEx problem with k22f board

rémiraynaud — Mon, 27 Apr 2015 15:12:50 GMT

Look at my installed software

thank's for your help

Re: PEx problem with k22f board

Carlos_Mendoza — Wed, 27 May 2015 01:32:45 GMT

Hi Rémi,

Apologies for the delay, could you post your project so I can test it on my side?

Best Regards,

Carlos Mendoza

Technical Support Engineer

Re: PEx problem with k22f board

rémiraynaud — Tue, 02 Jun 2015 07:08:57 GMT

Thank's Carlos for replying,

we have move to KDS 3.0 and there is no problem now,

I don't have this project anymore so I can't post it.

Good continuation

Best regards,

Rémi