topic Re: How to create a new release configuration for an existing kinetis project? in Kinetis Design Studio

How to create a new release configuration for an existing kinetis project?

joseplluismoral — Fri, 15 May 2015 21:48:07 GMT

Hi averyone!

I would like to know which are the basic steps in order to build a release configuration for a targe in Kinteis Design Studio 3.0

Thanks!

Re: How to create a new release configuration for an existing kinetis project?

Alice_Yang — Mon, 18 May 2015 03:21:17 GMT

Hi JOSEP,

By default, debug and release mode is the same in KDS .

Please refer to here :

https://community.freescale.com/message/510657?et=watches.email.thread#510657

Have a great day,
Alice

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: How to create a new release configuration for an existing kinetis project?

BlackNight — Tue, 19 May 2015 04:48:45 GMT

Right click on the project and use Bulid Configurations > Manage:

Then you can add/delete/manage build configurations.

Erich

Re: How to create a new release configuration for an existing kinetis project?

joseplluismoral — Wed, 03 Jun 2015 19:16:15 GMT

Thanks for the quick response

But I mean, if I can generate a release configuration without the debug data being placed in internal Flash in the debug configuration by default, Is this possible in KDS 3.0?

Re: How to create a new release configuration for an existing kinetis project?

BlackNight — Thu, 04 Jun 2015 06:25:36 GMT

Hi Josep,

> "without the debug data being placed in internal Flash"

Embedded Debugging is different from host/linux debugging :-).

I recommend that you have a read at Debug vs. Release? | MCU on Eclipse

The debugger data (or debugger information) is never placed in the internal flash. All the debug information remains on the host PC. Only the code itself is downloaded to the target.

I hope this helps,

Erich

Re: How to create a new release configuration for an existing kinetis project?

joseplluismoral — Thu, 04 Jun 2015 10:50:20 GMT

Thanks Erich and Alice!

I will take a look at that info!!