Kinetis Design StudioのトピックRe: Accelerometer example/sample code for FRDM-KL27Z

Accelerometer example/sample code for FRDM-KL27Z

evelamartinez — Fri, 26 Jun 2015 14:55:10 GMT

Hi folks,

please, do you have any accelerometer example/sample code for FRDM-KL27Z?

Thank you,

Evela

Re: Accelerometer example/sample code for FRDM-KL27Z

EarlOrlando — Fri, 26 Jun 2015 19:23:30 GMT

Hello Evela,

I recommend you to take a look into the example located in the KSDK 1.2.0 installation folder C:\Freescale\KSDK_1.2.0\examples\frdmk64f\demo_apps\bubble_level_ftm which contains an example for the same accelerometer that is included in the FRDM-KL27Z. This example shows how to interface the accelerometer with your kinetis MCU. This demo is written in KSDK so its portability is very transparent, you just need to configure the I2C pins to be compliance.

I hope this helps.

I remain at your service.

Best regards,

Earl Orlando.

Re: Accelerometer example/sample code for FRDM-KL27Z

lucasrangit — Tue, 07 Nov 2017 23:07:27 GMT

I went to https://mcuxpresso.nxp.com/en/example-projects and downloaded the bubble example for the FRDM-KL27Z. The project imported and builds but the debug configurations did not. I have to manually re-create them. I'll make a new ticket regarding this.