topic Re: How to debug and load a project in Kinetis Design Studio

How to debug and load a project

narreddisivapra — Wed, 30 Sep 2015 07:43:36 GMT

Hi sir..,

I started to develop a project on Freedom development board using K64 controller. Now I'm facing issue with debug and loading project into board. so, please suggest and let me know how to debug and load a project into board and also suggest related documents.

Thank you,

Regards.,

Siva Prakash Reddy,

Cygnus Microsystems

Re: How to debug and load a project

Carlos_Mendoza — Wed, 30 Sep 2015 17:01:09 GMT

Hi Narreddi,

I would recommend you to take a look to the following Kinetis Design Studio videos:

Installation of KDS and Kinetis SDK: https://community.freescale.com/videos/3281
Installation of OpenSDA Firmware: https://community.freescale.com/videos/3282
Debugging with KDS: https://community.freescale.com/videos/3283
Building the KSDK demo applications: https://community.freescale.com/videos/3378

Let us know if you have any question!

Hope it helps.

Best Regards,

Carlos Mendoza

Technical Support Engineer

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: How to debug and load a project

vijenad — Thu, 01 Oct 2015 07:05:57 GMT

Hello Reddy,

Its quite common to have start-up problems. Can you please be specific in your question as it helps us to provide solutions.

Type of evaluation board :

IDE Version :

And few snapshots of the issues.

Best wishes

Re: How to debug and load a project

narreddisivapra — Thu, 01 Oct 2015 07:14:20 GMT

Actually I'm new to kinaties and trying to understanding IDE and How to start a project in KDS. I dont know how to debug and proper settings regarding to a project.

At present I'm using IDE Version: KDS 3.0.0.

Regards.,

Siva Prakash Reddy,

Cygnus Microsystems

Re: How to debug and load a project

vijenad — Thu, 01 Oct 2015 08:38:09 GMT

Hello Reddy,

Click on New Kinetis Project

Enter Project Name
Click Next, Select processor
Click Next, Enable Processor Expert

Click Next, Select Compiler
Finish
Write your code, Build it
Click on debug icon

Create de-bug configuration

Click on debug

Run it

Re: How to debug and load a project

DavidS — Thu, 01 Oct 2015 14:19:59 GMT

Hi Reddy,

The others have given great information for you to review.

Another option is a step-by-step online training specifically for the FRDM-K64F for beginners that should prove to be very helpful:

Freedom Development Platform for Kinetis K|Freescale

Regards,

David