topic Re: KDS30 Debug and Prog in Kinetis Design Studio

KDS30 Debug and Prog

CCandido — Thu, 07 May 2015 21:29:14 GMT

Hi,

KDS20 debug/programming = error, I unistall it.

NOW KDS30 error =;

I use Multilink C, conection K22F ok.

How to Configurations for ( Debug and programming flash )?

See:

Connection from "127.0.0.1" via 127.0.0.1

Command Line :C:\Freescale\KDS_3.0.0\eclipse\plugins\com.pemicro.debug.gdbjtag.pne_2.0.8.201504092111\win32\pegdbserver_console -device=Freescale_K2x_K22FX512M12 -startserver -singlesession -serverport=7224 -interface=USBMULTILINK -speed=1000 -usejtag -p

CMD>RE

Initializing.

Cannot enter background mode. Check connections.

Error Resetting device for programming.

PE-ERROR: Error downloading to the device.

thanks.

Carlos.

Re: KDS30 Debug and Prog

takaoyamada — Fri, 08 May 2015 13:25:19 GMT

Greetings,

If you had issues connecting in both KDS2.0 and 3.0, then the issue is most likely in hardware and not in the software.

1) Are you using any custom adapter, custom ribbon cables, external watchdog, a reset circuitry, or other unique hardware?

2) Has this setup worked in the past? Or is this your first attempt? Do you know if the P&E hardware and the board are in working condition?

3) What P&E hardware interface are you using?

Takao YamadaP&E Microcomputer Systems

Re: KDS30 Debug and Prog

CCandido — Sat, 09 May 2015 15:23:56 GMT

hi,

KDS30, IT NOT DEBUG

KDS30 DEBUG AND PROGRAMMER OK.

my programmer it ( P&E Multilink Universal ).

it not run in MODE ( SWD ).

Thanks,

Carlos.