topic Re: Project didn't start under debuger, kds3 ksdk120 MQX full in Kinetis Design Studio https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410262#M2999 <HTML><HEAD></HEAD><BODY><P>Hi Bernard,</P><P>Glad you are up and running.</P><P>The disable feature to disable the watchdog from running is mainly to allow debugging of code where you might hit breakpoints or halt for time frame longer than the watchdog timeout so as not to have a reset occur.</P><P>I typically see customer disable during bedug and development of application and turn on lastly for testing and production code.</P><P>Regards,</P><P>David </P></BODY></HTML> Mon, 01 Jun 2015 16:08:10 GMT DavidS 2015-06-01T16:08:10Z Project didn't start under debuger, kds3 ksdk120 MQX full https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410257#M2994 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I made a new project from scratch with KDS3, KSDK12, stand alone, processor Expert, with a K64F (frdm). I add MQX full with the new default task main_task that should blink a led.</P><P>There is some IRQ on 3 gpio not used.</P><P>Clock came from external osc PTA18</P><P>All compile good.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>When I run debuger, the project didn't start and stay at boot.s 0x410. see below screenshoot:</P><P>I have a bigger project with the same problem.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Maybe some one can give me a soultion?</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Bernard</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P><span class="lia-inline-image-display-wrapper"><img src="https://community.nxp.com/t5/image/serverpage/image-id/120365iC486C5F4FA12C68A/image-size/large?v=v2&amp;px=999" title="32686_32686.png" alt="32686_32686.png" /></span><span class="lia-inline-image-display-wrapper"><img src="https://community.nxp.com/t5/image/serverpage/image-id/1147i88238D13B880F71B/image-size/large?v=v2&amp;px=999" title="pastedImage_0.png" alt="pastedImage_0.png" /></span></P></BODY></HTML> Fri, 29 May 2015 13:29:52 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410257#M2994 dafodil 2015-05-29T13:29:52Z Re: Project didn't start under debuger, kds3 ksdk120 MQX full https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410258#M2995 <HTML><HEAD></HEAD><BODY><P>Hi Bernard,</P><P>Please post your project to get additional help.</P><P>Regards,</P><P>David </P></BODY></HTML> Fri, 29 May 2015 13:44:16 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410258#M2995 DavidS 2015-05-29T13:44:16Z Re: Project didn't start under debuger, kds3 ksdk120 MQX full https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410259#M2996 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I attached the "test" project to this message.</P><P>Note: linker file generator is desactivated after seeing the heap size to 0000.</P><P></P><P>regards</P><P>Bernard</P></BODY></HTML> Fri, 29 May 2015 14:41:18 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410259#M2996 dafodil 2015-05-29T14:41:18Z Re: Project didn't start under debuger, kds3 ksdk120 MQX full https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410260#M2997 <HTML><HEAD></HEAD><BODY><P>Hi Bernard,</P><P>Please disable WDOG by setting value to "yes".</P><P><span class="lia-inline-image-display-wrapper"><img src="https://community.nxp.com/t5/image/serverpage/image-id/24959i0B7910C1938729E2/image-size/large?v=v2&amp;px=999" title="ScreenHunter_146 May. 29 12.46.gif" alt="ScreenHunter_146 May. 29 12.46.gif" /></span></P><P>Regards,</P><P>David</P></BODY></HTML> Fri, 29 May 2015 17:53:09 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410260#M2997 DavidS 2015-05-29T17:53:09Z Re: Project didn't start under debuger, kds3 ksdk120 MQX full https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410261#M2998 <HTML><HEAD></HEAD><BODY><P>Hi David,</P><P></P><P>It works. Thank a lot.</P><P>I understand my mistake.</P><P>To make this test project, I used a processor defined inside other project (drag and drop) where I plan to use WatchDog and where I add a component watchdog.</P><P>What is the target of this option 'watchdog disable'?</P><P></P><P>Regards</P><P>Bernard</P></BODY></HTML> Mon, 01 Jun 2015 08:34:09 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410261#M2998 dafodil 2015-06-01T08:34:09Z Re: Project didn't start under debuger, kds3 ksdk120 MQX full https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410262#M2999 <HTML><HEAD></HEAD><BODY><P>Hi Bernard,</P><P>Glad you are up and running.</P><P>The disable feature to disable the watchdog from running is mainly to allow debugging of code where you might hit breakpoints or halt for time frame longer than the watchdog timeout so as not to have a reset occur.</P><P>I typically see customer disable during bedug and development of application and turn on lastly for testing and production code.</P><P>Regards,</P><P>David </P></BODY></HTML> Mon, 01 Jun 2015 16:08:10 GMT https://community.nxp.com/t5/Kinetis-Design-Studio/Project-didn-t-start-under-debuger-kds3-ksdk120-MQX-full/m-p/410262#M2999 DavidS 2015-06-01T16:08:10Z