topic Re: Unable to Debug after KDS Update in Kinetis Design Studio

Unable to Debug after KDS Update

nikolaykulikov — Tue, 04 Aug 2015 07:25:24 GMT

After a fresh install of KDS3.0.0, everything works. Once I do a software update I can no longer debug.

I have tried starting a new work space and that doesn't help.

Installed software of my KDS:

Component Development Environment 1.8.0.RT7_b1515-1052

Component Development Environment Documentation 1.1.0.RT7_b1515-1052

Documentation for Kinetis Design Studio V3.0.0 4.0.0

Embedded Systems Register View (SFR) 0.2.4.r178

FSL Eclipse Updater Custom Actions Feature for Eclipse 4.4.x 2.0.12.FSL_150303

GNU ARM C/C++ Cross Compiler 1.14.1.201508011813

GNU ARM C/C++ J-Link Debugging 3.2.1.201508011813

GNU ARM C/C++ OpenOCD Debugging 3.2.1.201508011813

GNU ARM PEMicro Interface Debugging Support 2.1.5.201507151627

Kinetis Design Studio 3.0.0

KSDK 1.2.0 Eclipse Update 1.0.1.b150603

MQX RTOS Project of Projects 1.1.8.201504151538

MQX RTOS Task Aware Debugger for GDB 1.0.8.201504151538

Processor Expert for Kinetis 3.0.0.RT7_b1515-0427

Processor Expert for Kinetis 3.0 - Patch 1 1.0.0.b150505

Project of Projects 1.1.8.201504141312

After trying to start debugging error message, stated on the screenshot.

Discussion inUnable to Debug after KDS Update It did not help.

Re: Unable to Debug after KDS Update

ivadorazinova — Tue, 04 Aug 2015 08:22:23 GMT

Hello Nikolay Kulikov,

thank you for good description of the issue. Please, what do you use for the system? Do you have Linux distribution 64-bit?

Actually I compare it with my updates in Installed Software and I don´t see something wrong.

So, I´m going to try it in Ubuntu 14.04.2 and tell you more.

Thank you for your feedback!

Iva

Re: Unable to Debug after KDS Update

nikolaykulikov — Tue, 04 Aug 2015 09:02:39 GMT

Yes, I use a 64-bit Linux.

In Windows XP, these same problem:

Re: Unable to Debug after KDS Update

ivadorazinova — Tue, 04 Aug 2015 15:35:07 GMT

Hello Nikolay,

It is strange,

please, do you have correctly set debugger?

What do you use for interface?

Do you have the newest firmware for your interface?

Regards!,

Iva

Re: Unable to Debug after KDS Update

nikolaykulikov — Wed, 05 Aug 2015 05:21:08 GMT

Hello, Iva!

I use FTDI interface on FT2232 debugger. Firmware of debugger correctly and working.

I use a bunch Openocd-GDB for debugging other families mikrokontrollers in KDS3.0.0 - there is no problem. Problem arise when i use Kinetis microcontrollers.

This is a topic where the problem went: https://community.freescale.com/message/535933#535933

When installing without updates KDS3.0.0 under GDB debug server is not running. After updating the KDS - do not run the appropriate plug-in Eclipse. The screenshots setting Openocd session under Linux and Windows.

Re: Unable to Debug after KDS Update

ivadorazinova — Wed, 05 Aug 2015 09:06:22 GMT

Hello Nikolay,

thank you for your feedback, more customers face this issue, currently we work on the solution.

It is the same issue as Unable to Debug after KDS Update with J-Link.

I will let you know.

Best Regards,

Iva

Re: Unable to Debug after KDS Update

nikolaykulikov — Wed, 05 Aug 2015 10:03:21 GMT

I use PE Multilink in other projects in the Kinetis K60. With this debug interface operating is normally.

On this particular board is not possible to connect to anything other than FT2232, so i use Openocd.

Re: Unable to Debug after KDS Update

BlackNight — Wed, 05 Aug 2015 10:12:50 GMT

I can reproduce that problem on my machine: using the latest GNU ARM Eclipse plugins causes J-Link and QUEMU to fail. I have filed a bug ticket on SourceForge and contacted the maintainer directly.

https://sourceforge.net/p/gnuarmeclipse/bugs/192/

Erich