topic Re: KDS MQX Task List and other views all blank in Kinetis Design Studio

KDS MQX Task List and other views all blank

rajbatra — Thu, 11 Jun 2015 23:23:42 GMT

Going through the MQX RTOS for Kinetis SDK User's Guide.pdf when I view the MQX Task List or MQX Stack Usage, they are blank. I can debug fine (step through, view symbols, etc.)

Thoughts?

Here's a screen shot (I'm debugging through the OpenOCD interface on windows 7 using virtual box - sounds quirky but has been quite stable otherwise).

Re: KDS MQX Task List and other views all blank

Carlos_Musich — Mon, 22 Jun 2015 23:22:27 GMT

Hi Raj,

What KDS version are you using? There was a similar bug that was fixed in MQX RTOS for KSDK1.2 running on KDS3.0.

Carlos

Re: KDS MQX Task List and other views all blank

rajbatra — Mon, 22 Jun 2015 23:28:12 GMT

Hi Carlos,

KDS3.0 with KSDK 1.2 (Eclipse Update: 1.0.1.b150603).

Thanks,

-Raj

Re: KDS MQX Task List and other views all blank

Carlos_Musich — Thu, 25 Jun 2015 22:44:56 GMT

Hi Raj,

Did you installed all the KDS updates? To do this you need to go to menu Help > Install New Software... then in Work with. select KDS site and install updates.

Please also note that to see the tasks in task list you need to pause the debugger.

Regards,

Carlos

Re: KDS MQX Task List and other views all blank

rajbatra — Thu, 23 Jul 2015 18:19:44 GMT

BTW, I purchased a Segger JLink and use the JTAG/SWD port instead of the USB and the MQX Task list shows up (and downloading code is way faster).

Re: KDS MQX Task List and other views all blank

peterfurey — Wed, 29 Jul 2015 21:00:29 GMT

I had a similar problem but just discovered a few minutes ago that these views only populate after you hit the pause button.

Re: KDS MQX Task List and other views all blank

ivadorazinova — Thu, 30 Jul 2015 14:09:16 GMT

Hello Peter,

please now - is your problem solved?

For showing values in MQX Task List is always needed suspend the program.

I answer you at another post

Please, let me know.

Best Regards,

Iva

Re: KDS MQX Task List and other views all blank

markscovel — Wed, 12 Aug 2015 15:51:23 GMT

I had the same problem as the original poster and had the same configuration (KDS3 + KSDK1.2).

I installed new software in KDS/eclipse and it solved my issue.

When paused, MQX menu items display data.

Thanks for the help.

Re: KDS MQX Task List and other views all blank

ivadorazinova — Thu, 13 Aug 2015 12:28:35 GMT

Hello Mark,

yes, that´s right.

You will see MQX Task List after suspend the program.

Also, the notice is in TAD User Guide please see page 13 to end.

That the List is available after suspend.

Regards!

Iva