topic KL02 doesn't work standalone in Kinetis Design Studio

KL02 doesn't work standalone

bitki — Mon, 05 Jan 2015 20:25:00 GMT

Hello,

I use Kinetis Design Studio V2.0.0.My cpu conf. like this:

I'm using FRDM KL25 dev board for USBDM debugger. When I load program with USBDM flash programmer, nothing happened but in debug mode its working. What is the wrong? Thanks.

Re: KL02 doesn't work standalone

Alice_Yang — Wed, 07 Jan 2015 02:49:47 GMT

Hi Gokhan,

1) The USBDM is open to everyone, so the USBDM from different company have a little difference ,

it usually used to CW, you should be sure whether yours can used to KDS.

2) In the FRDM-kl25 board , you can directly flash through the openSDA , it only need link use USB. You can try .

Best Regards

Alice

Re: KL02 doesn't work standalone

bitki — Wed, 07 Jan 2015 09:14:32 GMT

Thanks Alice,

I'm not using FRDM-kl25 board to develope, only using to programming extenal device. My custom board has MKL02Z32VFK4.