printf prints only one character

lijofrancis — Mon, 16 Feb 2015 09:53:59 GMT

Dear sir

For debugging i am using printf function .i have problem when it printing it prints only one character.

please answer me urgently . i am using TWR k60f120m tower board with on board osjtag with kinetic design studio.But the same code by using k40 tower board i able perform full printf function and its working.the same toolchain using for k60 tower board then what is the reason i am not getting

my code some portion

1) now i write my code

printf("ad7193 is ok\n\r\n\r");

else

printf("ad7193 is not ok");

for(;;) {

//Block(0xffff);

ad7193_setreg(AD7193_REG_MODE,0x090D56,3);

Block(0xffff);

value=ad7193_getreg(AD7193_REG_MODE,3);

printf(print,value);

Block(0xfffff);

value=ad7193_getreg(AD7193_REG_CONF,3);

printf("config reg\n\r %x\n\r",value);

value=ad7193_getreg(AD7193_REG_ID,1);

printf("Id reg\n\r %x\n\r",value);

value=ad7193_getreg(AD7193_REG_STAT ,1);

printf("stat reg\n\r %x\n\r",value);

Block(1000000);

2) ouput of console port

it prints only first character of printf

3) inserting my debugger image

4) inserting startup for semihosting enabling

Re: printf prints only one character

Carlos_Mendoza — Tue, 17 Feb 2015 16:03:04 GMT

Hi Lijo,

I have replied to your question on this other post:

Re: K60 PE Micro debugging not working console using printf

Hope it helps!

Best Regards,

Carlos Mendoza

Technical Support Engineer

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

topic Re: printf prints only one character in Kinetis Design Studio

printf prints only one character

Re: printf prints only one character