topic Re: Using USBDM with Kinetis Design Studio in Kinetis Design Studio

Using USBDM with Kinetis Design Studio

pgo — Fri, 02 May 2014 14:02:25 GMT

Dear All,

Just having a play with KDS.

For those interested in using USBDM + KDS it appears to be quite straightforward.

Since KDS is based on a relatively lightly modified Eclipse (compared to Codewarrior 10) it is possible to just treat it as a basic Eclipse install as far as USBDM is concerned.

Just install USBDM as usual but select the Eclipse CDT Plugins installation:

Then browse to the eclipse subdirectory within the KDS installation directory:

Complete the installation.

After installing you will need to configure USBDM in Kinetis Design Studio (Eclipse):

Select the Browse button to locate the ARM tools that USBDM needs. This can be pointed at the ARM-GCC installation included in KDS.

You can use your usual KDS projects but now can create a USBDM launch configuration.

For more details on this see Launch Configuration Settings this link:

USBDM: Eclipse - New Project Wizard

An added bonus is that you also gain a Kinetis peripheral register viewer:

bye

PS. One further feature - If you install Codesourcery for Coldfire you can also develop and debug code for Coldfire devices in KDS. A bit of an unexpected feature .

Re: Using USBDM with Kinetis Design Studio

geoffs — Mon, 05 May 2014 07:27:45 GMT

pgo, thanks for the instructions. I've installed the latest release of USBDM as shown above, including the CDT plugins for KDS, but when I launch KDS there isn't any "USBDM" menu entry. Are there additional installation steps required ?

thanks.

Re: Using USBDM with Kinetis Design Studio

pgo — Mon, 05 May 2014 11:05:58 GMT

Hi Geoff,

Why is it that I can check something several times and still not see an error!

When installing USBDM please select the eclipse directory in the KDS installation - not the KDS root as shown in the screen grab above.

Sorry for the misinformation.

To fix without re-installing copy the contents of the dropins directory that was created in the KDS root directory into the eclipse\dropins directory.

Alternatively uninstall and re-install with a selection of the KDS/eclipse directory.

I will update the above screen grab shortly.

Sorry for the stuffing around.

bye

PS.

The next version of USBDM will auto-select the KDS directory. I'll put this up in a few days - it will fix some minor annoyances.

Re: Using USBDM with Kinetis Design Studio

geoffs — Mon, 05 May 2014 11:11:02 GMT

Brilliant ! As you suggested, I moved the "USBDM" subdirectory from the KDS_1.0.1\dropins directory into KDS_1.0.1\eclipse\dropins instead, and now it works fine.

Thanks - and don't feel bad - without you, we would be nowhere :smileyhappy:

Re: Using USBDM with Kinetis Design Studio

pratiekbhadrana — Mon, 01 Jun 2015 04:50:36 GMT

Great Post pgo