Kinetis Design Studio中的主题 Issue getting KDS 1.1.0 to debug FRDM-KL02Z board using PE_Micro/OPENSDA

Issue getting KDS 1.1.0 to debug FRDM-KL02Z board using PE_Micro/OPENSDA

Pirosity — Fri, 08 Aug 2014 19:04:40 GMT

I'm having an issue getting my FRDM-KL02Z board communicating to KDS 1.1.0

I've installed the openSDA application DEBUG-APP_v105_Pemicro.SDA provided in the FRDM-KL02Z_QSP within the FRDM-KL02Z board. I get a solid green light on the board and and I can connect to the board using code-warrior 10.4.

I've verfied that the USB drivers for the PE micro openSDA debugger are present in device manager:

Here is the debug configuration I setup:

When i hit the debug button i get the following error message:

Any idea what this error message means?

Re: Issue getting KDS 1.1.0 to debug FRDM-KL02Z board using PE_Micro/OPENSDA

BlackNight — Fri, 08 Aug 2014 19:31:56 GMT

Hello,

not sure if this matters, but:

P&E has an updated debug app (MSD-DEBUG-FRDM-KE02Z_Pemicro_v114.sda), available from https://www.pemicro.com/opensda/.

At least this is what I'm using.

And with this I can debug my board. Your settings in the screenshots looks good to.

Just in case, I have attached my project. Note that I had to increase the heap size in the linker file because the newlib-nano needs that.

Can you try this?

I hope this helps,

Erich

Re: Issue getting KDS 1.1.0 to debug FRDM-KL02Z board using PE_Micro/OPENSDA

cesarrabak — Tue, 28 Oct 2014 00:08:16 GMT

By the same token of lateral pertinency :smileyhappy:, it may help to remember that in version 1.1.1 of KDS in the pemicro\opensda folder under the KDS 1.1.1 installation folder it can be found all the updates for SDA from P&E.

HTH

Cesar Rabak