topic Kinetis Design Studuo Debugger in Kinetis Design Studio

Kinetis Design Studuo Debugger

lstrattan — Tue, 14 May 2024 17:47:13 GMT

Hi Team,

Using KDS, when I setup flash from file, and get to debugger section, selecting USB Multilink, USB Multilink FX, Embedded OSBDM/OSJTAG as my interface, and click refresh, the USB Port does not come up.

Debugger

When I check Device manager, this is what i receive:

Below is the Programmer I'm using.

Please advise.

Thanks.

Lem

Re: Kinetis Design Studuo Debugger

ZhangJennie — Wed, 15 May 2024 10:11:03 GMT

HI lstrattan,

Your second picture shows the device not correctly recognized.

Please download USB Multilink Resources Install from this url

https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320180&productTab=1000000.

This package contains PEFirmwareConfig.exe utility, technical summaries, up-to-date firmware, and other resources.

Using this tool to update P&E multilink FX firmware and install the up-to-date firmware. See how it works.

I would also suggest you chanage another PC can USB cable to isolate influence of other possiable factors

Thanks,

Jun Zhang