Kinetis Microcontrollers中的主题 Re: is need external programmer

is need external programmer

parthibankandas — Fri, 11 Oct 2013 03:30:19 GMT

hi,

i am entirely new to freescale semiconductor and i like to develop my knowledge in freescale. For that i choose to buy

MEMS Sensors Evaluation Kit with Freescale FRDM-KL25Z Freedom Platform kit. is this kit need any external programmer?, can i do programming without external programmer?

Re: is need external programmer

kerryzhou — Sat, 12 Oct 2013 05:29:21 GMT

Hi Parthiban kandasamy,

If you use FRDM-KL25Z, you don't need use other programmer, because the boad has the sophisticated OpenSDA Debug interface.

About detail, you can refer to the FRDM-KL25Z User's manual, the link is :

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=FRDM-KL25Z&fpsp=1&tab=Documentation_Tab

I wish it helps you!

Best regards!

Jing

Re: is need external programmer

parthibankandas — Sun, 13 Oct 2013 12:48:32 GMT

thank you jingjing, its perfectly gave the answer which i need.just drag and drop application into bootloader then bootloader updates previous programmer am i right?

Re: is need external programmer

kerryzhou — Mon, 14 Oct 2013 02:21:51 GMT

Hi Parthiban kandasamy,

Yes, you are right. If you put the MSD-FRDM-KL25Z_Pemicro_v105.SDA into bootloader, you can send the xxx.srec to the bootloader, then the boader will run the according program.

and if you need debug, you should choose DEBUG-APP_Pemicro_v102.SDA into bootloader,then you can debug through the IDE(eg.CodeWarrior V10.x,IAR ARM Workbench or Keil MDK-ARM ).

You still can find detail information from openSDA user's guide ,the link is :

http://cache.freescale.com/files/32bit/doc/user_guide/OPENSDAUG.pdf?fpsp=1

I wish it helps you!

Best regards!

Jing