Kinetis MicrocontrollersのトピックRe: TWR-K64f120M Factory configuration. https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269169#M8955 <HTML><HEAD></HEAD><BODY><P>Thanks for the info. I'm downloading it now and I'll give it a try. </P><P></P><P>After seeing that you found a jumper that wasn't configured as the QS guide indicated, I checked the rest. In my case, J15, J10, J29 and J39 were not set consistent with the QS guide. </P><P></P><P>Thanks</P><P>-Tim</P></BODY></HTML> Mon, 03 Mar 2014 19:29:44 GMT timothydavison 2014-03-03T19:29:44Z TWR-K64f120M Factory configuration. https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269167#M8953 <HTML><HEAD></HEAD><BODY><P>What firmware is burned onto the TWR-K64F120M module from the factory? When I power it up, I can see the USB MSD, but the LEDs don't light based on tilt like the Quickstart guide says they will. Also, is there a Users Guide for this board - I can only find the quick start guide.</P><P></P><P>Thanks</P><P>-Tim</P></BODY></HTML> Fri, 28 Feb 2014 21:35:43 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269167#M8953 timothydavison 2014-02-28T21:35:43Z Re: TWR-K64f120M Factory configuration. https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269168#M8954 <HTML><HEAD></HEAD><BODY><P>I made my own demo: <A href="http://mcuoneclipse.com/2014/03/02/first-steps-with-the-freescale-twr-k64f120m/" title="http://mcuoneclipse.com/2014/03/02/first-steps-with-the-freescale-twr-k64f120m/">First Steps with the Freescale TWR-K64F120M | MCU on Eclipse</A></P><P>I have attached the sources of my project (using Eclipse Kepler).</P></BODY></HTML> Sun, 02 Mar 2014 10:55:03 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269168#M8954 BlackNight 2014-03-02T10:55:03Z Re: TWR-K64f120M Factory configuration. https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269169#M8955 <HTML><HEAD></HEAD><BODY><P>Thanks for the info. I'm downloading it now and I'll give it a try. </P><P></P><P>After seeing that you found a jumper that wasn't configured as the QS guide indicated, I checked the rest. In my case, J15, J10, J29 and J39 were not set consistent with the QS guide. </P><P></P><P>Thanks</P><P>-Tim</P></BODY></HTML> Mon, 03 Mar 2014 19:29:44 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/TWR-K64f120M-Factory-configuration/m-p/269169#M8955 timothydavison 2014-03-03T19:29:44Z