Kinetis MicrocontrollersのトピックRe: FRDM-KL25Z - Example Projects Help

FRDM-KL25Z - Example Projects Help

ashokfair — Fri, 28 Feb 2014 09:11:30 GMT

Hi Everyone!

I have freedom development kit ,FRDM-KL25Z

I downloaded example files which includes output files (SREC files for different application). i noted the size of SREC is smaller (less than 100K).

But if i tried to create new project with Processor Expert , i am getting the output file (S19) size in Mb. Also my S19 not working in Board. I have chossed Open SDA.

so where i can get the free example source file for Blinking Led (Open SDA) project?

thanks,

ashok r

Re: FRDM-KL25Z - Example Projects Help

BlackNight — Fri, 28 Feb 2014 09:45:49 GMT

Hi Ashok,

maybe there is a problem with your s19 settings. You might have a look here: S-Record Generation with gcc for ARM/Kinetis | MCU on Eclipse

The S19 file for my Processor Expert LED demo project is 10 KByte.

That project is located on GitHub here: mcuoneclipse/Examples/FRDM-KL25Z/Freedom_LED at master ·GitHub

An article about it can be found here: Tutorial: Enlightning the Freedom KL25Z Board | MCU on Eclipse

I hope this helps,

Erich

Re: FRDM-KL25Z - Example Projects Help

ashokfair — Fri, 28 Feb 2014 10:59:04 GMT

Hi Erich,

Thanks , let me try out today and i will come back.

And one more thing why we need to select LED components in PE ? Selecting GIPO component is sufficient right , using GIPO we can control the port pins correct?

thanks,

ashok r

Re: FRDM-KL25Z - Example Projects Help

BlackNight — Fri, 28 Feb 2014 11:18:17 GMT

Yes, normal BitIO or GPIO_LDD is what you can use too.

See http://mcuoneclipse.com/2012/11/12/tutorial-bits-and-pins-with-kinetis/

Re: FRDM-KL25Z - Example Projects Help

ashokfair — Fri, 28 Feb 2014 20:11:25 GMT

Yes , Erich now my code is working , i am able to generate output file but the name of output file is set to *.hex how to change it to *.s19

Re: FRDM-KL25Z - Example Projects Help

BlackNight — Sat, 01 Mar 2014 09:00:18 GMT

Yes, that's a known problem of the Sourcery Plugins that they always use .hex as extension.

Have a look at

S-Record Generation with gcc for ARM/Kinetis | MCU on Eclipse

and search for .hex: there is a solution in the comments section of that post.

Re: FRDM-KL25Z - Example Projects Help

ashokfair — Sat, 01 Mar 2014 10:08:52 GMT

Thanks Erich !

I am frequently getting Error "The system cannot find the file specified path". sometimes its going after clean and Build but now i couldn't clear this error

what could be the reason?