topic Re: an effective usage of UART Interrupt in Kinetis Microcontrollers

an effective usage of UART Interrupt

pradyumnakammar — Tue, 09 Jul 2013 12:29:24 GMT

looking for help in implementing interrupt driven UART.

i have used UART communication by polling method. but driving the same over interrupt looks little tricky.

Looking for some in-puts as im new to this MCU.

Thank you

Pradyumna

Paul_Tian — Wed, 10 Jul 2013 01:38:13 GMT

Hi, Pradyumna

You can download KINETIS_50MHZ_SC sample project from our website. Then you replacement attached files. Then you can run into ISR routine.

Hope my reply can help you.

Best Regards

Paul

pradyumnakammar — Thu, 11 Jul 2013 05:13:41 GMT

Thank you for your reply Tian.

Will look into the attached files.

and also i had forgot to mention above that i'm using KL05 MCU .

Paul_Tian — Thu, 11 Jul 2013 06:34:59 GMT

Hi, Pradyumna

For KL05, you can reference the code structure. Please pay attention that interrupt vector is not the same. So you need to change interrupt vector.

Hope my reply can help you.

Best Regards

Paul