Kinetis MicrocontrollersのトピックRe: Flex Bus API for reading and writing data

Flex Bus API for reading and writing data

chethankumar — Tue, 09 Apr 2013 07:16:39 GMT

Can anyone help me with the API for reading and writing data from flex bus?

Re: Flex Bus API for reading and writing data

apanecatl — Thu, 11 Apr 2013 17:19:44 GMT

I recommend you check AN4393, you will find it useful

Re: Flex Bus API for reading and writing data

chethankumar — Fri, 12 Apr 2013 07:31:10 GMT

Hi,

Can u provide example code for read and write operation in flex bus?

Thanks

On Thu, Apr 11, 2013 at 10:49 PM, Pedro Augusto Panecatl Salas <

Re: Flex Bus API for reading and writing data

apanecatl — Fri, 12 Apr 2013 19:17:49 GMT

The code is written in the App Note, you only need to copy, paste and compile.

Re: Flex Bus API for reading and writing data

Hui_Ma — Tue, 16 Apr 2013 07:47:29 GMT

Please check Kintis 100MHz product example, which includes FlexBus example code.

The code could be downloaded from below link:

KINETIS512_SC : Kinetis family example projects.

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=K60_100&nodeId=01624698C9DE2DDDAF&fpsp=1&tab=Design_Tools_Tab

Wish it help.

Re: Flex Bus API for reading and writing data

chethankumar — Sat, 20 Apr 2013 11:28:37 GMT

How to set flex bus frequency? Is there any API for it? Othervise how to

set.

Thanks

Re: Flex Bus API for reading and writing data

Hui_Ma — Mon, 22 Apr 2013 03:32:54 GMT

You can set Flexbus clock frequency at System Clock Divider Register 1 (SIM_CLKDIV1) [OUTDIV3] bits.

Wish it helps.

Re: Flex Bus API for reading and writing data

chethankumar — Wed, 24 Apr 2013 09:35:55 GMT

Hi,

My present code is working on 10MHz and i want to increase it to 30MHz. How to do that. I tried SIM_CLKDIV1 but thats not helping me. Is there any particular register where we to set frequency of a flexbus?

thanks

Re: Flex Bus API for reading and writing data

Hui_Ma — Thu, 25 Apr 2013 05:56:18 GMT

Hi Kumar,

Which mode of MCG module works in? Just use MCG works in PEE as an example, Kinetis 100MHz product could run core clock frequency up to 100MHz and Flexbus clock frequency up to 50MHz. When MCG module output clock at 100MHz, the System Clock Divider Register 1 (SIM_CLKDIV1) [OUTDIV3] bits set value to 0b11, which is 1/4 of MCG output clock frequency (25MHz). If you want to run Flexbus at 30MHz, the MCG output clock need to be 90MHz/60MHz/30MHz. And you need to set (SIM_CLKDIV1) [OUTDIV3] bits value to 0b10/0b01/0b00.

Wish it helps.

Best regards,

Ma Hui

Re: Flex Bus API for reading and writing data

chethankumar — Thu, 25 Apr 2013 07:13:26 GMT

Ok thank u

Re: Flex Bus API for reading and writing data

chethankumar — Mon, 29 Apr 2013 10:59:09 GMT

Hi,

Can anyone provide source code for KITSTARTER2EVM: Sensor Toolbox Starter Kit. i.e for accelerometer, pressure sensor, proximity sensor and motion sensing flatform.

Re: Flex Bus API for reading and writing data

chethankumar — Mon, 29 Apr 2013 11:01:25 GMT

Hi,

Can anyone provide source code for KITSTARTER2EVM: Sensor Toolbox Starter Kit. i.e for accelerometer, pressure sensor, proximity sensor and motion sensing flatform.