Kinetis Microcontrollers中的主题 Re: K61 Controller Ethernet Link Establish Problem

K61 Controller Ethernet Link Establish Problem

mani8421 — Sat, 25 Jan 2014 13:41:32 GMT

We are working with KSZ8041NL for our requirement with K61 Controller.

when we are connecting the Ethernet cable to the Jack the two status LED’s simultaneously go ON and OFF continuously as long it is connected. And the link is not established between Host PC.

Can any suggest what could be the problem

Re: K61 Controller Ethernet Link Establish Problem

hectorsanchez — Mon, 27 Jan 2014 15:14:00 GMT

Hi Mani,

Looks like you have activity on the port and probably the jacks or the cable is not working as intended, try to change the cable and test the jack on another device.

Hope this helps,

Hector Sanchez

Re: K61 Controller Ethernet Link Establish Problem

mani8421 — Mon, 27 Jan 2014 15:25:38 GMT

Hi Hector,

Thanks for the reply

Problem is solved by changing the Ethernet Jack....

Thanks and regards,

MANI