Porting SPI Driver to Keil RL-ARM System: UnInit

tfrauenrath — Wed, 03 Jul 2013 13:46:05 GMT

My task is to port a NXP SPI driver delivered with Keil RL-ARM to my Kinetis K60 system. Finlay I want to talk to SD cards in SPI mode. I do this step by step. My next task is the UnInit routine.

This is the original NXP UnInit:

/* Return SSP interface to default state. */
static BOOL UnInit (void) {

  IODIR0 &= ~(1<<20);
  PINSEL1 &= ~0x000003FC;
  SSPCR1 = 0x0000;
  SSPCR0 = 0x0000;
  SSPCPSR = 0x00;
  return (__TRUE);
}

This my first trial for the Kinetis UnInit:

/*--------------------------- UnInit ----------------------------------------*/
static BOOL UnInit (void) {
/* Return SSP interface to default state. */
PORTD->PCR[11] = PORT_PCR_MUX(1);     /* Alt 1 for GPIO*/
PORTD->PCR[12] = PORT_PCR_MUX(1);     /* Alt 1 for GPIO*/
PORTD->PCR[13] = PORT_PCR_MUX(1);     /* Alt 1 for GPIO*/
PORTD->PCR[14] = PORT_PCR_MUX(1);     /* Alt 1 for GPIO*/

SIM->SCGC3 &= ~SIM_SCGC3_SPI2_MASK;    /* Disable SPI2 gate clocking        */
SIM->SCGC5 &= ~SIM_SCGC5_PORTD_MASK;   /* Disable PORTD gate clocking        */
    
return (__TRUE);
}

Do you think this is applicable for SD card access via SPI?

I will discuss the other routines in other threads because of a better overview. I will post the final driver, because Keil provides only samples for SDHC mode for memory cards for the Kinetis system.

Thank you

topic Porting SPI Driver to Keil RL-ARM System: UnInit in Kinetis Microcontrollers

Porting SPI Driver to Keil RL-ARM System: UnInit