topic Re: KV58F220M GHS FLASH ISSUE in Kinetis Microcontrollers

KV58F220M GHS FLASH ISSUE

Pavan_Moody — Mon, 22 Dec 2025 06:21:41 GMT

Hi Team, i am finding issue in downloading code in RAM. FYI PFA.

Output from command:

Green Hills Probe error 1 (general error).

ERROR 1 (general error): Icepick could not activate core.

load: Download failed.

Re: KV58F220M GHS FLASH ISSUE

Pavan_Moody — Mon, 22 Dec 2025 07:20:31 GMT

Output from command:
Executing setup script: C:\Users\Pavan.Jm\Downloads\KV58ramconfig\Project57\tgt\mpserv_standard.mbs
ERROR 1 (general error): SWD FAULT
ERROR 1 (general error): CTRL/STAT.STICKYERR set
Green Hills Probe error 1 (general error).
ERROR 1 (general error): Couldn't read register trcpdsr on core 1.

I HAVE followed Jumper setup in manual still i have some other issue can you help me out .

Re: KV58F220M GHS FLASH ISSUE

Celeste_Liu — Mon, 22 Dec 2025 09:23:07 GMT

Hello @Pavan_Moody ,

Thank you for your post. Unfortunately, we don’t have Green Hills or the Green Hills probe available, so I’m unable to try it on my side. I tested using MCUXpresso and our SDK, and everything worked fine. SDK can be found here: Select Board | MCUXpresso SDK Builder. The test steps were as follows:

1. Import the SDK “Hello World” demo into mcuxpresso

2. Set the “Link application to RAM” option

3. Move RAM to position 1

4. Compile and debug

Everything ran without issues.
As for Green Hills, it is not one of our officially supported IDEs. If you prefer to continue using it, I recommend reaching out directly to their support team.

Thanks for your understanding and have a nice day.

Celeste

Re: KV58F220M GHS FLASH ISSUE

Pavan_Moody — Mon, 22 Dec 2025 09:28:37 GMT

Thank you for the response, where i can try linking RAM address in my starting script and try to get support from GHS