Kinetis MicrocontrollersのトピックRe: Flexbus configuration modified in MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

Flexbus configuration modified in MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

ChristofAbt — Thu, 16 Oct 2025 14:32:29 GMT

Hello,

this is an information. Each time if I change something in the Pins perspective and update the code, the following two entries in my flexbus configuration are changed

.byteLaneShift is modified to kFLEXBUS_NotShifted,

and

.portSize is modified to kFLEXBUS_1Byte

It took me a while to find out why my flexbus does not work any more

after having added a pull-up to a pin.

Best regards

Christof Abt

Re: Flexbus configuration modified in MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

EdwinHz — Thu, 16 Oct 2025 17:56:59 GMT

Hi @ChristofAbt,

In order to support you better, could you please share the MCU that you are using?

Also, have you had the opportunity to test this on our newest MCUXpresso IDE release (v25.6)?

Re: Flexbus configuration modified in MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

ChristofAbt — Mon, 27 Oct 2025 06:38:32 GMT

Good morning,

I am using the FRDM-K66F board and the MCOXpresso version

MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

best regards

Christof Abt

Re: Flexbus configuration modified in MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

EdwinHz — Tue, 28 Oct 2025 16:37:49 GMT

@ChristofAbt,

Thanks for the information, I recommend updating to the latest version of MCUXpresso (v25.6).

Either way, thanks for reporting your findings on the v24.12 release of the IDE.

BR,

Edwin.