topic Re: Hardfault handler exception in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1849585#M66314 <P>Set the application start address in flash in MCU settings which resolved the issue</P> Thu, 18 Apr 2024 06:47:03 GMT arunkannan 2024-04-18T06:47:03Z Hardfault handler exception https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1848716#M66305 <P>The jumptouserapplication() function is going to hardfault handler in NXP Kinetis Bootloader 2.0.0</P><P>Tried debugging but couldnt resolve.</P><P>Kindly help</P> Wed, 17 Apr 2024 05:33:00 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1848716#M66305 arunkannan 2024-04-17T05:33:00Z Re: Hardfault handler exception https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1849384#M66310 <P>Hello, my name is Pavel, and I will be supporting your case, but I´m following your 3 cases, I will continue this in the internal where you upload some images.</P> <P>Best regards,<BR />Pavel</P> Thu, 18 Apr 2024 01:23:52 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1849384#M66310 Pavel_Hernandez 2024-04-18T01:23:52Z Re: Hardfault handler exception https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1849585#M66314 <P>Set the application start address in flash in MCU settings which resolved the issue</P> Thu, 18 Apr 2024 06:47:03 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Hardfault-handler-exception/m-p/1849585#M66314 arunkannan 2024-04-18T06:47:03Z