CAN NOT FIX FRDM-KL25Z FOR DEBUGGING ON MCUXPRESSO IDE

SinanUsta — Sun, 03 Dec 2023 16:40:52 GMT

Hello,

I once configured my FRDM-KL25Z board to run on the mbed platform. I then tried to reconfigure it to run on the MCUXpresso IDE by following the steps in the link below and the steps on OPENSDAUG.pdf.

https://mcuoneclipse.com/2014/11/01/illustated-step-by-step-instructions-updating-the-freescale-freedom-board-firmware/

Unfortunately the board can not boot well also, IDE cannot detect and connect the board right now. Before I started working on Mbed, I was able to work on MCUXpresso IDE. Can someone help me with this?

Thanks,
Kind Regards.

#FRDM #KL25Z #PEMicro

Re: CAN NOT FIX FRDM-KL25Z FOR DEBUGGING ON MCUXPRESSO IDE

Pavel_Hernandez — Mon, 04 Dec 2023 18:51:40 GMT

Hello, my name is Pavel, and I will be supporting your case, I suggest using the steps on this page, please use the Segger bin.

OpenSDA Serial and Debug Adapter | NXP Semiconductors

Best regards,
Pavel

topic Re: CAN NOT FIX FRDM-KL25Z FOR DEBUGGING ON MCUXPRESSO IDE in Kinetis Microcontrollers

CAN NOT FIX FRDM-KL25Z FOR DEBUGGING ON MCUXPRESSO IDE

Re: CAN NOT FIX FRDM-KL25Z FOR DEBUGGING ON MCUXPRESSO IDE