Kinetis MicrocontrollersのトピックRe: Is there any ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported

Is there any ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported

admin — Wed, 19 Feb 2014 22:28:47 GMT

Hi can you please help me answer this request,

I need an ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported.

Thanks in Advance!!!

Denisse

Re: Is there any ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported

terrypeterson-b — Wed, 19 Feb 2014 23:09:49 GMT

This board isn’t made by Freescale, but it uses an i.MX233 iMX233 ARM926J processor at 454Mhz and has an NTSC/PAL interface:

https://www.olimex.com/Products/OLinuXino/iMX233/iMX233-OLinuXino-MINI/open-source-hardware

Re: Is there any ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported

LuisCasado — Wed, 19 Feb 2014 23:17:42 GMT

Hi Terry,

i.MX233 has analog video output

Luis

Re: Is there any ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported

LuisCasado — Wed, 19 Feb 2014 23:22:10 GMT

Hello,

Vybrid processors has video input, upto 4 channels. VF6xx derivative. But TWR system doesn't implement the video input. You can find many Vybrid modules in the market, but no video input easy to get in the carrier board. BUT, you can check this solution:

http://devicesolutions.net/vybrid.aspx

That board implements 2 x RCA Video input in the development kit.

Best Regards,

Luis

Re: Is there any ARM development board from Freescale with Analog camera interface (NTSC or PAL) supported

admin — Thu, 20 Feb 2014 01:15:17 GMT

Thank you :smileyhappy: