topic Re: MCU Expresso cmd line build issue @windows. in Kinetis Microcontrollers

MCU Expresso cmd line build issue @windows.

StephenYeh — Mon, 05 Dec 2022 02:38:01 GMT

Hi Sir,

I follow the MCUXpresso IDE command user guide.pdf.

Would you help us to check what is the issue about this error?

cmd as below :(command line build code error)

mcuxpressoide.exe -application com.nxp.mcuxpresso.headless.application -run example.build C:/Projects/frdmkw38_beacon_freertos/example_build.properties -data C:/Projects/tmp -consoleLog -noExit

propreties as below:

Re: MCU Expresso cmd line build issue @windows.

EduardoZamora — Thu, 08 Dec 2022 19:00:26 GMT

Hello @StephenYeh

Hope you are doing well.

Could you please share the log file? Log should be located inside workspace/.metadata folder as a text file (or more than one file):

Also, could you please share your property file (example_build.properties)? This information would be very helpful.

Please take a look at this site: Building Eclipse and MCUXpresso IDE Projects from the Command Line. Here you can fine an example on how to use headless builds.

Regards,
Eduardo.

Re: MCU Expresso cmd line build issue @windows.

StephenYeh — Mon, 12 Dec 2022 03:37:58 GMT

Hi Eduardo

Pls help to check with attached file

Re: MCU Expresso cmd line build issue @windows.

EduardoZamora — Mon, 12 Dec 2022 17:17:58 GMT

Hi,

Please, try moving the SDK (zip or folder) to an empty folder. After that, test command line modifying the following lines in your property file (sdk.name will depend on your SDK version):

Comment/remove this line:

example.xml = C:/Projects/frdmkw38_beacon_freertos/DebugMKW38A512xxx4.xml

Modify these lines:

sdk.name = SDK_2_6_15_FRDM-KW38

board.id = frdmkw38

Please let me know your results.

Regards,
Eduardo.