topic Re: Erase Flash Action in Kinetis Microcontrollers

Erase Flash Action

victorheca — Wed, 14 Sep 2022 22:03:43 GMT

Hi,

When I debug my firmware on MCU of MKL25Z128 using PnE. It always failed and hang MCUXpress IDE software. IDE found PnE device and PnE works well under Code Warrior. Is there anything wrong with my settings? Many thanks.

Re: Erase Flash Action

victorheca — Wed, 14 Sep 2022 22:04:29 GMT

Sorry my debugger is PE Micro.

Re: Erase Flash Action

ErichStyger — Thu, 15 Sep 2022 03:35:20 GMT

Can you share your project?

Re: Erase Flash Action

victorheca — Thu, 15 Sep 2022 17:20:26 GMT

Hi, Erich,

Here is my project. Many Thanks to your kind help.

Re: Erase Flash Action

victorheca — Thu, 15 Sep 2022 22:22:11 GMT

Hi, Erich,

I managed to make the debugger works now. Thanks for your help.

Re: Erase Flash Action

ErichStyger — Mon, 19 Sep 2022 07:13:12 GMT

I noticed that in your project you have the wrong SDK/MCU assigned?

This can cause all kind of problems, so I suggest that you change the SDK to the KL25Z one.